3-Phase 32A 5-Pin Adaptor
Adapter for PAT testing 3-Phase equipment fitted with 5 Pin, 32A, red plugs.
Suitable for use with all PAT testers that have a standard 13A socket. Three phase equipment can be tested for earth continuity and insulation resistance using this adapter, but most test instruments are unable to carry out a 3-phase leakage, load or polarity test.
Three-phase power is most often used for industrial equipment and machinery. 3 Phase equipment may be wired in two different configurations, either star or delta. A star configuration, also called a Wye or Y, usually has a neutral conductor and will therefore require a 5 pin plug (3 phases + neutral + earth). A delta configuration does not require a neutral conductor, so a 4 pin plug can be used (3 phases + earth). We also supply a 4-Pin 3-phase 32A industrial adaptor.
These adaptors are constructed with BS EN 60309 industrial connectors made by PCE, a leading manufacturer of high quality connectors based in Austria.
Please note, these adaptors are intended for electrical testing use only. They can not be used to power 3-phase equipment from a single phase, 230V supply.